FLASH LEAGUE / DRAFT EXHIBITION

Physics Soccer Official Rule Book

Spectator explanation

Move, bump and kick one ball into an opposing goal. Each credited goal scores one. Most goals after three rounds wins.

Pitch presentation

White boundary and halfway lines, a center circle and spot, and goal/penalty boxes mark the pitch. Four-team fields use a symmetric cross through the center circle. Raised goal frames and mesh nets are decorative; goal scoring uses the published whole-ball crossing rule. Formation boundaries and home-position markers are not drawn. Player numbers remain visible.

Positions, zones and kickoffs

Draft 7 assigns fixed formation slots from complete explicit per-entry positions or the frozen lineup order. One player is a whole-field rover. Two use keeper and rover. Three use keeper plus two overlapping full-length wing halves. Four use keeper plus three overlapping full-width depth bands. Five use keeper plus four whole-field quadrants. Six add a free-roaming central striker to the four quadrants. Both teams occupy every quadrant; they are not restricted to their own half. All physical capabilities remain equal.

Zone responsibility

Keepers and quadrant players have fixed rectangular responsibility zones relative to their own goals; the central striker and rover can use the whole pitch. All authored profiles steer to targets inside their zone, with an interior braking margin. A robot pushed outside by contact returns to its zone; there are no invisible walls, teleports or zone fouls. Only teammates who can reach the ball from their zone compete to apply ball pressure. Others hold role positions, with the goalkeeper covering angles near its own goal line and claiming only balls within its short goal area. Kick reach permits playing an adjacent ball without leaving the zone. Off-ball defenders move onto the incoming ball-to-goal line when their goal is threatened, while an eligible teammate applies ball pressure.

Starting formation and rotations

Initial entrants start at published homes. After goals, players walk from their current locations to those homes at up to 80 units per tick; they do not teleport. The ball returns to center after the goal replay. During this ceremonial walk, competitive contacts and kicks are disabled. Only when every robot has reached its home does the shared three-second countdown begin. Round transitions rotate homes and zones with goals and walk the players to the new assignments. The competition clock advances only during active play. Each member receives a seeded goal-relative home offset of up to 600 integer units on each axis. It remains inside the assigned zone and rotates with the formation; replay uses the same seed and member identity. New offsets are drawn deterministically for every goal kickoff, preventing identical opening sequences from repeating. Players walk to the revised homes; they never teleport.

Zone presets

Coordinates are goal-relative and rotate with each team. The four quadrant zones span depth and lateral intervals 0–0.55 or 0.45–1, giving a 10%-wide shared strip around each center line. Physical radius clearance applies at field walls. Quadrant homes are at local depths 0.19 or 0.69, lanes 0.25 or 0.75, separating opposing lineups. The central striker may roam the whole pitch with physical radius clearance, retaining home (0.40, 0.50) for kickoffs. Keepers start 2.4 world units from their goal line, cover a maximum depth of 6 world units and a lateral interval extending 1 world unit beyond either post, with physical wall clearance. Three-player wing zones cover the full field length and overlapping lateral halves. Four-player outfield bands cover the full field in thirds with 0.05 overlap beyond their shared edges. Other players cover and receive inside their own responsibility areas.

Directional passing and receiving

Full kicks use sixty-four absolute world-space directions, selected toward the opposing goal or intended teammate independently of the player's facing. A clear close shot takes priority. The controller tests damped ball trajectories through the whole goal opening and visible player movement led by up to twenty ticks, then selects the opening with the greatest opponent clearance. A current opening does not guarantee a goal against subsequent defensive movement. Otherwise the authored controller compares a physical dribble into open ground with a pass to a better-positioned teammate. A dribble advances by body contact with the ball: it never attaches the ball, grants protected possession or applies a hidden impulse. The bot checks forward and angled routes inside its responsibility area. It keeps the ball when the carry is open and a pass offers insufficient extra attacking value. Pass scoring rewards progress and a receiving position near goal, while penalizing aim error, receiver pressure and interception risk from visible opponent positions and velocities. A defender in a passing lane is a penalty, not an absolute prohibition; riskier passes can still be attempted and physically intercepted. Teammates directly blocking the outlet are avoided. Receivers are led by up to twenty ticks, targets stay within the receiving player's responsibility area, and passes are at most eighteen world units. An unpressured receiver with the ball on the wrong side cushions a fast pass with a short controlled touch, circles around the ball and turns into a goalward dribble rather than automatically returning the ball to the passer. The maneuver stays within the player's responsibility and uses normal physical movement/contact. Backward or sideways passes remain possible to escape genuine pressure. Passing and dribbling award no points. When neither is suitable, bots keep contesting with legal movement and kicks; they never reset an inactive ball.

Movement and physics

Eight movement directions or stop, with an optional full kick in one of sixty-four absolute directions or short control touch in one of sixteen absolute directions; one ball action per tick. Integer positions use 1000 units per world unit. Simulation runs at 60 Hz, with four fixed substeps and two simultaneous-delta contact iterations per substep. Robot radius is 1000, ball radius 600. Equal robot mass is four times ball mass. Base robot speed is capped at 100 units per tick. The unique closest robot within kick range receives a 10% speed-cap boost only while it belongs to the latest qualifying touch batch; there is no possession lock. Tied nearest robots receive no boost. The boosted cap is 110 units per tick; ball speed at 300. Acceleration, damping, restitution, tolerances and caps are pinned in the rule source. Robots collide with each other and walls. No fouls, offside, spin control, health or upgrades.

Kicks and simultaneous contact

A full kick requires the ball center within 2000 units and an available cooldown. It redirects the ball at 240 units per tick along the selected world-space aim, absorbing the prior incoming trajectory, with a 60-tick cooldown. Facing and movement direction do not rotate that aim. A receiving control touch uses the same reach, redirects at 75 units per tick and has a 12-tick cooldown. A player cannot combine a full kick and touch in one action. All accepted simultaneous ball actions average their requested velocity vectors, then clamp ball speed once; there is no last-writer advantage. Subsequent physical contacts can block or deflect either action. Body contact deltas use the same iteration snapshot, and qualifying contacts retain bounded attribution history. An exactly simultaneous attacking touch by several teams remains uncredited in four-team play unless a later touch resolves attribution; do not award by array order.

Goals and restarts

The whole ball must cross a goal plane inside the mouth. Two-team goals award the opponent, including own goals. Four-team goals award the most recent uniquely eligible touching team other than the conceding side; defending touches preserve prior attacking credit. Individual credit requires a unique qualifying member. After a goal, preserve the goal frame for one second, replay up to the preceding three seconds at half speed using recorded states, then walk back, wait for every entrant, and count down 3–2–1. The round clock pauses for this entire sequence. A final-tick goal receives its replay before round closure, without another kickoff. A stationary or contested ball remains in play indefinitely until a goal or the round ends. There is no inactivity reset, relocation, automatic impulse or dead-ball restart.

Layouts

Two-team fields are 60 by 40, 90 by 60 or 120 by 80 world units. Four-team fields are square: 48 by 48, 72 by 72 or 96 by 96, with one equal goal on each edge. Small supports up to four robots, medium six to twelve and large sixteen to twenty-four. Goal half-widths are 4, 6 or 8 world units. Arena presets are frozen before play.

Formats and competition

Exactly two or four teams field one to six active members each, with no bench rotation. Four-team arenas are square, with symmetric starts and equally sized goals or bases. Positions rotate between rounds; three rounds cannot give four teams every edge. Balance assignments across fixtures. Physical capabilities and computation limits are equal.

Match and ties

Three ten-minute active-play rounds are always played. Total goals determine shared placements with no overtime. Intro and closing last 45 seconds each, with two 60-second breaks. Practice uses three five-minute active-play rounds, ten-second breaks and five-second intro/closing. Total wall time varies with goal replays, walks and countdowns, all excluded from the competition clock. The coordinator waits for actual completion; soccer cannot be placed in a rundown requiring a guaranteed hard end. Final-tick outcomes score before closure. Retain match totals across rounds.

Identity and controllers

Elixir supplies the selected entrant IDs, names, numbers, colors and approved artwork. Production controllers are authored deterministic programs; no live model calls or biography-derived traits. Match configuration pins controllers, rules, solver, arena, objective setup where applicable, seed and asset references. Invalid output becomes a recorded fault and neutral action.

Interruption and reproduction

Host timing interruptions, engine mismatches and uncertain recovery hold competition. Aborts produce no official result. Preserve configurations, original source and dependencies, runtime identity, journals and permitted inputs. The common analysis harness independently regenerates seeded runs; journal replay is explicitly recorded-action verification. Rendering, OBS, overlays, replay and the single stream mixer consume one presentation cursor and never decide results.

Release status

Draft exhibitions are not official league history, season awards or prediction settlement. Freeze rules only after scoped mechanical, reproduction, recovery, integrated Elixir exhibition and recorded capture checks, plus separate human spectator review.

Machine readable parameters

{
  "version": "draft-7",
  "status": "Draft",
  "hz": 60,
  "crashPoints": 0,
  "radius": 1000,
  "ballRadius": 600,
  "acceleration": 7,
  "robotSpeed": 100,
  "ballSpeed": 300,
  "kickRange": 2000,
  "kickCooldown": 60,
  "restartTicks": 180,
  "substeps": 4,
  "solverIterations": 2,
  "robotDamping": 960,
  "ballDamping": 999,
  "restitution": 750,
  "rounds": 3,
  "zoneMargin": 800,
  "maxPassDistance": 18000,
  "passLeadTicks": 20,
  "maxPassMiss": 3500,
  "shotDistance": 18000,
  "formations": {
    "overlap": 0.05,
    "teamOffset": 0.06,
    "coverHomeDepth": 0.4,
    "roverHomeDepth": 0.38,
    "wingHomeDepth": 0.4,
    "bandHomeOffset": 0.04,
    "homeJitter": 600,
    "keeperHomeDistance": 2400,
    "keeperRoamDistance": 6000,
    "keeperSideMargin": 1000
  },
  "goalHoldTicks": 60,
  "replayLookbackTicks": 180,
  "replayRate": 0.5,
  "returnSpeed": 80,
  "roundSeconds": {
    "practice": 300,
    "standard": 600
  },
  "carrierSpeedMultiplier": 1100,
  "dribbleLookahead": 8000,
  "dribbleMinProgress": 2000,
  "passAdvantage": 2500,
  "passInterceptionPenalty": 12000,
  "kickSpeed": 240,
  "touchSpeed": 75,
  "touchCooldown": 12,
  "kickDirections": 64,
  "goalHalfWidths": [
    4000,
    6000,
    8000
  ]
}